Equipment OEMs
Forming and stamping presses, enamel and paint lines, foaming machines, torque tools, leak and functional testers.
- Native connector support
- Joint control-envelope definition
- Co-developed safety interlocks
Partner programme opening with cohort one
We do notreplace yourstack.
Duromex sits between the equipment that already exists and the systems that already run your plant. Partnerships are how that stays true at scale.
Four kinds of partner
Each solves a different part of getting autonomy onto a real line.
MES and quality vendors
Genealogy, non-conformance, disposition and traceability systems that must stay the system of record.
- Bi-directional integration
- Serial-level genealogy exchange
- Non-conformance write-back
System integrators
Partners who deploy, commission and support Duromex inside plants across a region.
- Certified deployment pattern
- Shared commissioning playbook
- Regional support coverage
AI infrastructure
The compute, simulation and model providers underneath the physical-AI stack.
- NVIDIA edge and simulation stack
- Cloud control-plane infrastructure
- Frontier reasoning models
Working with equipment OEMs
An agent that can adjust a press parameter is only safe if the bounds of that adjustment are defined by the people who built the press.
We work with equipment OEMs to define control envelopes jointly, so the authority Duromex is granted is explicitly what the machine tolerates — not what we guessed.
What joint work covers
- Connector certification against real firmware
- Control envelope bounds defined by the OEM
- Fail-safe and interlock behaviour verified together
- Telemetry schemas agreed rather than reverse-engineered
- Joint support path when a line has an issue
How Duromex meets your systems
Direction and responsibility for each integration surface.
| System | Protocol | Duromex reads | Duromex writes |
|---|---|---|---|
| Forming / stamping press | OPC UA, PLC tags | Force curves, tonnage, tooling state | Bounded parameter adjustment |
| Enamel / paint line | OPC UA, REST | Film build, cure profile, surface imaging | Coverage and cure setpoints |
| Foaming machine | OPC UA, PLC tags | Shot weight, mix ratio, jig temperature | Shot and cure parameters |
| Assembly tooling | MQTT, tool APIs | Torque, seating, sequence compliance | Gating and station instruction |
| Leak / functional tester | MQTT, REST, file | Decay curves, functional results | Sequencing and disposition |
| MES / quality system | REST, file drop | Genealogy, orders, product master | Non-conformance and disposition records |
Where partners plug in
Equipment underneath, MES alongside, integrators around, AI infrastructure below — with Duromex as the layer that turns all of it into decisions.
Form & stampWeld & seamEnamel & paintFoam & insulateWire & assembleLeak & function testRate & pack
The infrastructure underneath
Edge compute
NVIDIA IGX-class hardware and Jetson devices run perception and control inside the plant, with no cloud dependency on the control path.
- Triton and NIM model serving
- Deterministic scheduling under takt
- Signed OTA update path
Perception and robotics
NVIDIA Isaac, Metropolis and Holoscan underpin vision, sensor streaming and robotic handling.
- Multi-camera fusion at the station
- Sim-to-real transfer for handling
- Streaming inference pipelines
Simulation
Omniverse and Cosmos power the digital twin that gates production changes before they reach a line.
- Line and product simulation
- Predicted yield and takt
- Change validation as a release gate
Reasoning
LangGraph orchestration with frontier reasoning models handles attribution, planning and evidence chains.
- Root-cause attribution across stages
- Citations back to source evidence
- Human-in-the-loop escalation
How a partnership starts
Deliberately concrete — the programme is small during pre-launch.
Technical fit
A working session on protocols, telemetry and where authority boundaries would sit.
Joint pilot
We pick one design-partner line where both technologies are present and prove the integration there.
Certification
The connector or integration is hardened, documented and versioned as part of the product.
Go to market
Joint material, shared references and a defined support path for shared customers.
What partners get
Clear about what is on offer today.
A reason to stay in the loop
Equipment that participates in a closed loop becomes more valuable than equipment that only reports.
Joint documentation
Certified connectors and control envelopes documented in the Duromex reference.
Faster deployments
A repeatable commissioning pattern rather than a bespoke project each time.
Shared safety posture
Interlocks and fail-safe behaviour verified jointly rather than assumed.
Early influence
Partners in cohort one shape connector design and the roadmap.
Regional reach
Integrators cover geographies a pre-launch company cannot staff directly.
Segments in the partner conversation
Refrigeration OEM · EU
Laundry OEM · North America
Cooking OEM · Turkey
Dishwashing OEM · Italy
Air-conditioning OEM · Asia
Tier-1 cabinet supplier
Design-partner programme, 2026. Duromex is pre-launch — partner identities are withheld under NDA and shown by segment, not by logo.
What Duromex will not do to a partner
Written down so it can be held against us.
0
MES systems we try to replace
0
partner telemetry resold
0
control writes outside the agreed envelope
100%
integrations documented and versioned
What partners tell us
“Our end-of-line functional testers told us what failed. They never told us which press stroke or foam shot caused it. That link is the whole product.”
“Foam voids are invisible until the energy rating comes back wrong. Predicting density distribution before the cabinet cures is the part I could not buy anywhere else.”
“If it writes to the press, it needs an audit trail a quality auditor accepts. Duromex started there instead of bolting it on.”
Common questions
Do you compete with MES vendors?
No. MES remains the system of record for genealogy, orders and disposition. Duromex decides and acts within takt and writes results back into MES.
Do you require specific equipment brands?
No. Connectors are protocol-based — OPC UA, MQTT, REST, PLC tags and file drops — so brand-specific certification is an enhancement, not a prerequisite.
Can integrators resell Duromex?
The programme is being defined with cohort one. Talk to us if you deploy into appliance plants in your region.
Is NVIDIA a partner or a supplier?
The NVIDIA stack is core infrastructure for our edge inference, simulation and robotics work. We build our own models and control layer on top of it.
Let us make your equipment part of the loop.
Equipment OEMs, MES vendors, integrators and infrastructure partners — talk to us.
Duromex is pre-launch. Figures shown are design-partner targets and modelled economics, not audited results. Ask us for the methodology.